Please be aware we will be performing ongoing website maintenance. Please be prepared to contact us at (413) 536-1311 if you need to reach us and find the site down
Here are your results. To contact us about any of these testers, click the "Request Information " button below.

The Mullen AH Burst Tester provides pressure readings up to 1500 PSI and is designed for testing corrugated, linerboard, and heavyweight textiles. The hydraulic-powered clamp is particularly adaptable to corrugated board, which must be clamped with moderation to prevent crushing the flutes. The hydraulic pressure may be easily adjusted to the exact pressure desired. Rapid testing is then possible with assured uniform clamping pressure.

The Mullen A Burst Tester provides pressure readings up to 1500 PSI and is designed for testing corrugated, linerboard, and heavyweight textiles. Its powerful motorized drive ensures constant force to the select sample and its hand screw clamp allows virtually infinite clamping pressure for hard-to-hold materials.

The Mullen J Burst Tester is designed for testing corrugated and linerboard and is suitable for occasional testing or where a low-cost portable unit is desired. Its hand wheel drive is suited for sample tests of shipping containers and should be limited to materials below 500 PSI.

Please Note: This tester is NOT electric. It is Hand-Operated.

Test Standards
Find Your Tester
Request Information

939 Chicopee Street, Chicopee, MA 01013-2797 • Tel (413) 536-1311 • Fax (413) 536-1367 • info@mullentesters.com

© 2015 Standex International Corporation. Your access and use of this site constitutes unconditional acceptance of the terms of our Web Site Use Agreement.